Description : PW BIOCIDE is a broad-spectrum non-oxidizing biocide.
Uses : PW BIOCIDE is ideally formulated for controlling algae and bacterial species commonly found in cooling water systems. Its efficiency is enhanced when used in conjunction with a quaternary ammonium salt.
PW BIOCIDE can be used in conjunction with all other water treatment chemicals including chlorine and hypochlorite.
Features : PW BIOCIDE is based on a Alkyl Guanidine salt and is effective against a wide range of microbes in near neutral to alkaline pH range.
Applications : PW BIOCIDE should be slug fed to the cooling tower sump at the point of highest mixing.
Dosage : The Dosage level of PW BIOCIDE depends on the type and level of the microorganism present. As a general guideline 40-100ppm will be adequate in controlling the growth of microbial species.
Typical Properties : Appearance : Clear to light yellow liquid AP. Gravity (at 25c) : < 1 PH : 7 (approx). Solubility : Miscible with water in all Proportion.
Benefits : PW BIOCIDE being a powerful surfactant has a strong scouring action, which maintains exceptionally clean cooling towers.
It works more effectively in alkaline pH condition and hence is particularly suitable for bio control in non-chromate cooling water treatment programs working in alkaline PH.
It also forms an electrostatic bond with carboxyl groups in cellulose and thus protects wooden cooling towers from fungi attack.
Handling : Contact with eyes, skin and clothing should be strictly avoided. It this material is swallowed seeks medical attention immediately.
Packaging : PW BIOCIDE is available in 30litre HDPE jerricans/barrels.